By Lassiter Strome. Kitchen Cabinets. At Monday, July 01st 2019, 06:19:26 AM.
Determine which areas are large enough to accommodate the roller. Pour a small amount of paint in the tray, soak the roller cover, then thoroughly roll out the excess. Roll these large spaces of wall in a W-pattern, covering sections of about 4 feet by 4 feet. Bring the roller to about an inch or two of the painter is tape.
Wood Cabinets: Paint adheres best over a scuffed surface, making true wood cabinets a great candidate for painting. Sand the surface to prep it for paint and the result is a better bond and smoother finish. This is especially important if your wood cabinets are already stained or have a glossy finish - you will need to get through this finish layer first, either with sandpaper.
Avoid painting kitchen cabinets with an eggshell or flat finish paint. These paints are not as washable as semi-gloss or gloss finishes, and you run the risk of rubbing through your paint job the next time you need to scrub your cabinet doors.
Then brush a single brush with the bonding first. Two primer coats are suggested, allowing the first to dry for at least four hours.
They should be correctly ready before the cabinets are painted. A few mild sanding methods are needed if the wood finish or ancient paint is soft and glistening. The surface must be rough and easy to adhere to the new paint. Clean them with soap and water after sanding the wardrobe surface. After drying, the cabinets edge, floor, counter tops, walls and other surfaces should have painting tape to prevent the color from entering places that you do not want. The painting should be applied.