By Lassiter Strome. Kitchen Cabinets. At Tuesday, July 02nd 2019, 01:21:37 AM.
Application Tips.Do you have flat cabinet doors, or do they feature inset panels and raised edges? If you have flat doors on your kitchen cabinets, you can make quick work of paint application by using a paint roller with ¼ nap (for the most even application and smooth finish). Paneled kitchen cabinets require a little more work—use a paint brush to evenly coat angled surfaces and inset areas. Remember to choose a synthetic bristle brush if you are using latex paint, since the water-based formula will swell the bristles of a natural paint brush.
If a surface has already been painted and the paint is in good, clean condition, it likely will not need priming. Unpainted drywall, bare wood, and painted surfaces in poor condition should be primed. Apply the primer with the roller on large areas and with the brush on areas too small to accommodate the width of the roller. Roll the Large Areas.
Wood Veneer Cabinets:If your cabinets have a wood veneer—essentially a very thin layer of real hardwood over a pressed material—you will also need to sand before painting your kitchen cabinets. But before you break out the sandpaper or paint, carefully inspect the veneer for loose edges, chips, or cracks. Repair these first with wood glue before sanding the veneered surface.
RTAkitchen cabinets can be an excellent way to begin your rustic kitchen.You could envisage switching counters to large wooden styles of butcher block counters if you have enough in your budget. If that is not feasible, you can create a cart with butcher block top as a central island if there is a space in your kitchen.
About ∣ Terms of Service ∣ Privacy Notice ∣ Cookie Policy ∣ Contact ∣ Copyright
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s.